Woodwop 5.0 Tutorial May 2026

WoodWOP 5.0 uses "Macros" for standard tasks. Here are the most common: Vertical Boring X and Y coordinates.

Use the 3D view to rotate the part and ensure holes aren't going all the way through the board by mistake. AI responses may include mistakes. Learn more

If you change the material from 19mm to 15mm, you only update it once in the table. The entire program will automatically adjust. 3. Basic Machining Operations woodwop 5.0 tutorial

Never send a program to the machine without checking the placement. Open the suction cup view.

Usually left as default unless using specific vacuum pod calculations. 2. Using Variables (The Pro Way) WoodWOP 5

Always use a "Ramp" or "Tangential" lead-in for routing to avoid burn marks on the entry point.

Choose "Left" or "Right" so the tool stays outside your finished line. 4. Understanding Components Components are "mini-programs" you can save and reuse. Example: A specific hinge hole pattern. AI responses may include mistakes

Found at the bottom; this is where you enter specific dimensions and variables. 1. Defining the Workpiece (Global Data)

Instead of Redrawing 4 holes for every door, you drag and drop the "Hinge" component.

Located on the left; it lists every machining step in order.