If you prefer to fix the settings without a full reset, you can edit the configuration file manually using a text editor like nano on the CLI or Notepad on a PC. /boot/config/network.cfg
After a reset, the server will request a new IP from your router via DHCP. You can find this new address by typing ipconfig (for Windows) or checking your router's client list.
If your server has multiple ethernet ports, Unraid may assign them differently after a reset. Ensure you are plugged into the port designated as eth0 . unraid reset network settings install
these files or rename them to network.cfg.old to keep a backup.
If you have a monitor and keyboard attached to your Unraid server, you can perform the reset directly from the command line interface (CLI). Log in as root . If you prefer to fix the settings without
To set a manual address, set USE_DHCP="no" and define IPADDR , NETMASK , and GATEWAY . Troubleshooting Tips
rm /boot/config/network.cfg rm /boot/config/network-rules.cfg Use code with caution. Reboot the server by typing reboot . 2. Reset via USB Flash Drive (on another PC) If your server has multiple ethernet ports, Unraid
Run the following commands to delete the configuration files:
To reset Unraid network settings to the installation defaults, from the /boot/config directory on your flash drive and then reboot your server. This action forces Unraid to regenerate these files with default DHCP settings during the next boot. 1. Reset via Local Terminal
Safely eject the drive, return it to the server, and power it on. 3. Using Unraid GUI Mode