Inspect the machine for thread jams in the hook area or check if the belt is too tight. Positioning signal error
Check if the speed unit connector is loose or dirty. Restart the machine; if it persists, replace the speed control unit. Motor locked rotor siruba l818fm1 error list work
Turn off the system and check the motor encoder connector. If the connection is secure but the error persists, the motor may need service. Abnormal over-current Inspect the machine for thread jams in the
Triggered when the machine head is tilted. Ensure the machine is in the correct upright position. Needle bar position error Motor locked rotor Turn off the system and
Often related to the synchronizer. Calibrate the needle stop position. Essential Troubleshooting Procedures
Ensure the encoder is properly connected and not loose. Clean the sensor disc if accessible. Encoder signal error