: Open the ink tank cover. Use the included ink bottles to fill each tank (Black, Yellow, Magenta, Cyan) to the upper line.
: After resetting, you can put the printer back into setup mode by holding the Wi-Fi button for about 5 seconds until the lights blink. This allows the Epson Smart Panel app or a computer to discover the device again. Installation and Initial Setup Installing the
A reset is often necessary if you are changing Wi-Fi networks or if the printer becomes unresponsive. Since the epson et 2400 reset install
Wait for the lights to stop blinking and turn off; the network settings are now restored to factory defaults.
involves both physical hardware preparation and software configuration. : Open the ink tank cover
: Once tanks are filled, press and hold the Start (or ink) button for 5 seconds to begin the ink charging process. This takes approximately 10 to 12 minutes . 2. Software Installation How to Reset Your Epson EcoTank ET-2400 Printer
Press and hold the button and the Power button simultaneously for about 5 seconds. This allows the Epson Smart Panel app or
does not have a screen, you must use the physical control panel buttons. : Turn off the printer by pressing the Power button.