In the CS-2200 software, go to the "Clone" menu and select "Read." This pulls the current settings from the radio to your PC. Always do this first to ensure you have a baseline backup.
Easily save your frequency lists as backup files. If you ever need to reset your radio or clone settings to a second unit, it takes seconds.
This is the proprietary Icom software designed specifically for the IC-2200H. It is compatible with most Windows environments. Ensure you have the correct version to match your radio’s firmware. 2. OPC-478 Programming Cable CS-2200 Icom IC-2200H Programming Software
To bridge the gap between your computer and your IC-2200H, you will need three key components: 1. The CS-2200 Software
The IC-2200H uses the (or the USB version, OPC-478UC ) cable. This cable plugs into the speaker jack on the back of the transceiver and connects to your PC’s USB or Serial port. In the CS-2200 software, go to the "Clone"
The Icom IC-2200H is a workhorse of a radio, and the is the best way to manage it. Whether you are prepping for a local public service event or organizing repeaters for a cross-country road trip, the software makes the process painless and organized. Do you have the OPC-478UC USB cable ready, or
Access menu options for DTMF, scanning edges, and packet settings more intuitively than navigating nested menus on the radio's small LCD. Requirements for Setup If you ever need to reset your radio
If you see a yellow exclamation mark in Device Manager, you likely need to roll back or update your USB-to-Serial drivers. Final Thoughts
The software provides a clear spreadsheet-style view of all your repeaters, simplex frequencies, and NOAA weather channels.
Plug the OPC-478 cable into the radio’s speaker jack and your computer. Turn the IC-2200H ON .