Chipblaster Jv10 Manual !link! May 2026

Pleated filter cartridges trap particulate matter down to 10 microns. A crossover valve setup allows operators to swap clogged filters while the unit remains fully operational.

Trigger the high-pressure coolant via M-code on the CNC controller. Loosen the locknut on the pressure regulator. chipblaster jv10 manual

The is a highly durable, high-pressure, high-volume coolant delivery system designed to optimize CNC machining operations. By delivering a continuous stream of filtered coolant at high velocities, the JV10 lowers cutting temperatures, clears away chips from the work area, and drastically improves tool lifespan and surface finish. Pleated filter cartridges trap particulate matter down to

Check the filters first. Clogged elements restrict flow. Alternatively, the regulator may need manual readjustment, or the internal positive displacement pump seals may be worn. Loosen the locknut on the pressure regulator

To maintain consistent performance, operators should adhere to a strict maintenance schedule.

Open the 1/4" petcock valves located on top of both the primary and safety filters.

Verify that the 3-phase power is fully on and the CNC control's M-code signal is active. Check the tank levels; the return pump will not run if the fluid level is too low.